Work Smarter Not Harder
 
 
 
Jack Buddy

T-3000AC

 
 
 
 
 
 
 
 
 
Safely support transmissions on your jack
(4R100), (4R70W), (5R55E,N,W,S), (A604), And Many More!
 
 
 
Many transmissions have irregularly shaped oil pans. Ford RWD’s are known for this, typically making necessary the use of scraps of wood to level the unit on the jack to ready it for installation.

Too often we hear an expletive shortly before a crash. Or when the tech is out for a week laid up with a strained back or, worst case, their career is ended.

The Jack Buddy is designed to fit the most popular, air-assisted undercar transmission jacks that are equipped with ratcheting-style supports. It installs in just minutes!

The Jack Buddy is engineered with a heavy-duty 2” ratchet strap assembly that SAFELY handles the awkward ones!
The A604 is secured using only the ratcheting side of the Jack Buddy; an original support is used at the diff. The strap is hooked to jack’s platform before being brought over and fed into the ratchet.
An LCT1000 positioned on jack with the manual shaft in the deepest notch. Since this transmission sits flat on the jack’s platform, this photo demonstrates the 2” ratchet strap holding this 400+ pound unit in place!
Look closely and notice we allowed clearance for later 4R100 pans that use a drain plug. The Jack Buddy is ready to go to work!
 
 
 
 
The Right Tool For The Job.
 


Comment

Copyright ©2004-2016 Adapt-A-Case, Inc. All rights reserved.